Low-temperature Aluminum Flux-cored Soldering Rod
HOW IT WORKS
Flux-cored Aluminum Electrode
Specification: 1.6mm thick, each 50 cm/ 19.7" long
Why Welders, Mechanics, & Household Handymen are calling this Soldering Rods "The Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair?" – No Expensive Equipment Required.
Does the Impossible
It makes a good joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength.
Extreme Performance
By Design. Solution Welding Rods are engineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.
From Amateur To Pro
Regardless of your prior experience, anyone can weld Aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.
How to Use
Step 1 - Clean the surface of the base metal thoroughly by brushing with stainless steel brush until it becomes shiny.
Step 2 - Pre-heat the area to be welded of the base metal evenly until it reaches the melting temperature at above 780°F/ 420°C
Step 3 - Rub the soldering rob against the heated area until the rod starts flowing.
Note: Do not heat the soldering wire DIRECTLY as it will crumb, and the soldering rob will be easily broken even if it's melt. Melting the rod directly will turn into crumby welds.
Guaranteed safe & secure checkout
HOW IT WORKS
Flux-cored Aluminum Electrode
Specification: 1.6mm thick, each 50 cm/ 19.7" long
Why Welders, Mechanics, & Household Handymen are calling this Soldering Rods "The Strongest, Fastest, and Easiest Aluminum Fabrication or Parts Repair?" – No Expensive Equipment Required.
Does the Impossible
It makes a good joint with slight penetration to base metal that is stronger than mild steel. Join thick or thin parts with a 45,000 lb tensile strength.
Extreme Performance
By Design. Solution Welding Rods are engineered to easily flow under a very low working temperature to ensure fast application to your project with minimal distortion.
From Amateur To Pro
Regardless of your prior experience, anyone can weld Aluminum without the need for expensive equipment like welding machines. All you need is a simple propane torch and some easy welding rods.
How to Use
Step 1 - Clean the surface of the base metal thoroughly by brushing with stainless steel brush until it becomes shiny.
Step 2 - Pre-heat the area to be welded of the base metal evenly until it reaches the melting temperature at above 780°F/ 420°C
Step 3 - Rub the soldering rob against the heated area until the rod starts flowing.
Note: Do not heat the soldering wire DIRECTLY as it will crumb, and the soldering rob will be easily broken even if it's melt. Melting the rod directly will turn into crumby welds.
Recommended for you
Recently viewed
About Us
We are your hardware store, and we are a part of your community. Made with the passion for the handy Do-it-yourself project, our products are quality guaranteed.
Hours: 9am - 5pm PST (Mon - Fri)
Address: Efforest Company Limited, Unit B, 12/F, 28 Yee Wo Street, Causeway Bay, Hong Kong
Phone: +1 888 556 0726/ +852 3169 0997